Pro Drain Experts
← All articles 9 Steps to Solve Health and Safety Audit Findings Faster How-to

9 Steps to Solve Health and Safety Audit Findings Faster

Last Updated: November 4, 2026

Quick Summary

Effective health and safety auditing depends on closing the gap between finding a problem and fixing it, which means defining clear scope and criteria, scoring each finding by risk and effort, and tracing it to its root cause. Each action then needs a named owner, a deadline, and a check that the fix worked.

  • Score each finding from 1 to 5 on severity, likelihood, legal exposure and effort, then multiply severity by likelihood for a risk score out of 25.
  • Findings scoring 15 to 25 on risk should trigger stop-work or interim controls until fixed.
  • Use the Five Whys for single findings, a fishbone diagram when several causes compete, and trend analysis for repeat findings.
  • Every action needs a clear outcome, one named owner, a completion date and a way to confirm it worked.
  • A finding that does not return after two audit cycles is genuinely resolved; one that returns means the root cause was missed.

Table of Contents

Most health and safety audits find problems. Far fewer get fixed. On commercial sites, a finding is often written down, filed, and then quietly returns at the next visit. Effective and efficient problem solving for health and safety auditing is the discipline that closes that gap. The research on safety culture points the same way: a Nielsen et al.'s industrial plant case study examined whether more and better safety activities could strengthen safety culture, and it treats activity quality as the lever, not audit volume alone. A separate 2022 study by Rantala et al. looked at the risk-assessment skills workplaces need and the support they can draw on to improve them.

The approach below takes an audit finding from discovery to verified closure in nine steps. It is written for site managers, facilities leads and anyone who inherits a list of findings and needs to clear it.

What a Health and Safety Audit Is and Why Findings Stall

A health and safety audit is a structured check of how work is actually done against the standards an organisation has set for itself. Its real output is not the list of findings but the decisions that follow from it.

Findings stall for three common reasons:

  • The finding is vague, so nobody knows what "fixed" looks like
  • No one owns the action, so it waits for someone to pick it up
  • The root problem is untouched, so the same finding returns

Industry guidance now frames audits around root causes rather than simply recording findings. HSI's guidance on insight-driven audits argues that leaders need to understand why a problem keeps occurring so it stops repeating. That shift in thinking is the foundation for everything that follows.

Preparing Your Audit Scope, Criteria and Documentation

Before the audit starts, define what it covers and what it will be judged against. Our guide to what a professional drainage report documents shows what a drainage report should contain, which helps when setting criteria for drainage assets. A clear scope stops findings sprawling into unrelated areas.

Settle these points first:

  • Scope: which sites, areas, activities and drainage assets are included
  • Criteria: the standards, procedures and legal duties you are checking against
  • Records: the prior audit reports, incident logs and maintenance records you will need

Gather the documents in advance. Auditors who arrive without the previous findings often repeat them, and that wastes the visit.

Health and Safety Audit Checklist: What to Verify on Site

A checklist keeps the walk-round consistent. It should prompt the auditor to verify, not just observe.

  • Are drainage covers, gullies and channels clear and in sound condition?
  • Is standing water or slippery residue present in walkways?
  • Are maintenance logs complete and up to date?
  • Do staff know how to report a blockage or flooding?
  • Are previous findings showing evidence of closure?

Watch out: a checklist ticked from the office, without walking the site, produces findings nobody trusts. Verify on the ground.

If a recurring fault appears during the walk-round, our guide on how to identify the root cause of recurring blockages shows how to trace it beyond the symptom. A reader checking drainage on site may also want to know the warning signs that a drain survey is needed, since those signs often explain why a finding keeps returning.

Prioritising Audit Findings by Risk, Urgency and Effort

Not every finding deserves the same response, and treating them as if they do is the fastest way to exhaust a small team. A practical method is to score each finding on four measures, then sort. This is the step most audit guides skip, yet it is where efficiency is won or lost.

Score each finding from 1 (low) to 5 (high) on:

  1. Severity of harm, how badly someone could be hurt, or how much damage a failure would cause. A missing drain cover over a walkway used by delivery drivers scores higher than a scuffed label on a plant room door.
  2. Likelihood, how probable it is that the hazard causes harm before the next audit cycle. Standing water in a pedestrian route during winter is more likely to cause a slip than a defect in a rarely accessed compound.
  3. Legal exposure, whether the finding touches a specific duty under the Health and Safety at Work etc. Act 1974, the Management of Health and Safety at Work Regulations 1999, or the Workplace (Health, Safety and Welfare) Regulations 1992. Findings that could attract an improvement or prohibition notice from the Health and Safety Executive (HSE) or a local authority inspector should be escalated regardless of the other scores.
  4. Effort to fix, time, cost in GBP, disruption and whether specialist contractors are needed. A blocked gully that needs a CCTV survey and jetting is higher effort than clearing a single leaf-covered grating.

Multiply severity by likelihood to get a risk score out of 25. Then place each finding in one of four bands:

  • Act now (risk 15-25, any effort): stop-work or interim controls until fixed. These are the findings that should never wait for the next meeting.
  • Schedule this cycle (risk 8-14, low or medium effort): book the work into the current maintenance window.
  • Plan and budget (risk 8-14, high effort): add to the capital or maintenance plan with a named owner and a date.
  • Monitor (risk 1-7): record, review at the next audit, and do not spend resource now.

A worked example makes the trade-off concrete. Suppose a food-production site has three findings: a grease build-up in a kitchen drain (severity 4, likelihood 4, risk 16, medium effort), a missing anti-slip strip on a fire exit step (severity 5, likelihood 3, risk 15, low effort), and a faded hazard sign in a storeroom (severity 1, likelihood 2, risk 2, low effort). The first two both fall in the act-now band; the sign does not. Without the scoring, teams often fix the sign first because it is easy, and leave the grease until it floods the yard.

Watch out: scoring by gut feel rather than writing the numbers down lets the loudest voice in the room set the priority. Record the scores in the action plan so the reasoning survives staff changes.

For small businesses with limited resource, the banding also answers the question of what to do first when everything looks urgent: act-now items get interim controls the same day, scheduled items go into the next maintenance slot, and monitored items are reviewed rather than actioned. That proportionate approach keeps the audit useful without turning it into an administrative burden.

The article scores each finding on four measures and sorts it into one of four bands, as summarised below.

Band Risk score Action
Act now 15-25, any effort Stop-work or interim controls until fixed
Schedule this cycle 8-14, low or medium effort Book into current maintenance window
Plan and budget 8-14, high effort Add to capital or maintenance plan with owner and date
Monitor 1-7 Record and review at next audit

Root Cause Analysis in Health and Safety: Finding the Real Problem

Fixing the symptom buys time. Fixing the cause stops the problem. Root-cause analysis asks why the problem exists, then asks why that is true, until you reach something you can actually change. Most audit guides stop at that definition; the practical question is which tool to use, and when.

Emergency call out →

Three techniques cover most audit findings. Choose by the shape of the problem, not by habit.

The Five Whys: best for single, linear findings

The Five Whys works when one cause leads to the next in a chain. Ask "why" about each answer until you reach a cause that management controls. Five is a guide, not a rule: some findings resolve in two steps, others in seven.

For a finding about a blocked drain, the chain might run: the drain is blocked, because grease builds up, because the kitchen has no grease trap, because nobody owns the trap's maintenance. The last link is the one to fix. Write each answer down; the written chain shows where the logic breaks and where an action should land.

Watch out: the Five Whys can drift into blaming an individual ("because the operative was careless") rather than a system. If an answer names a person, ask why the system allowed that error to go unnoticed, and keep going.

The fishbone (Ishikawa) diagram: best for findings with several contributing causes

When a finding has more than one plausible driver, a slip in a loading bay, say, a fishbone diagram stops the analysis collapsing onto the first cause someone mentions. Draw the effect (the finding) at the head, then branch causes under standard categories: people, equipment, process, environment, management and materials. For the loading bay slip, branches might include inadequate drainage (environment), worn anti-slip coating (equipment), no cleaning schedule (process), and unclear reporting route (management). The diagram does not rank causes; it exposes them so you can test each one against the evidence.

Incident and finding trend analysis: best for recurring problems

If the same finding appears across audits, sites or shifts, the cause is usually systemic rather than local. Pull the last 12 months of audit findings and incident reports and group them by type, location and shift. A pattern such as repeat drainage blockages at the same Ringmer site every autumn points to leaf ingress or a design issue, not to the maintenance team's diligence. Trend analysis is also the tool that tells you whether a corrective action worked: if the finding type falls away after the fix, the root cause was addressed; if it persists, the analysis was too shallow.

Choosing between them

Use the Five Whys for a single finding with an obvious chain. Use a fishbone when the finding has several possible causes and the team disagrees about which matters. Use trend analysis when the finding is a repeat, or when you need to verify that a previous fix held. In practice, many teams use the Five Whys first and escalate to a fishbone if the chain forks.

Record the chosen tool and the output in the action plan. An auditor reviewing the next cycle can then see not just what was fixed but why the fix was chosen, which is the difference between an audit that closes findings and one that keeps rediscovering them.

Building a Health and Safety Audit Action Plan That Gets Done

An action plan turns decisions into owned tasks. Every action needs four things:

Site supervisor and worker reviewing an action plan during health and safety auditing in a UK depot
Site supervisor and worker reviewing an action plan during health and safety auditing in a UK depot
  • A clear description of the required outcome
  • A named owner
  • A completion date
  • A way to confirm it worked

A plan with no owner is a wish list. Assign each action to one person, and check progress at a fixed point, such as the next team meeting.

Good plans also keep the detail visible. Our guide to commercial drainage maintenance contracts covers the options for ongoing work, which helps when an action is to put a recurring maintenance regime in place.

How Often to Carry Out a Health and Safety Audit

Frequency depends on risk. A site with high-hazard processes or a history of incidents needs audits more often than a low-risk office. Review the schedule after every significant finding, change of process, or incident.

Some organisations pair a full audit with shorter spot checks between cycles. The spot checks catch regression early, before a closed finding quietly reopens.

Measuring Whether Corrective Actions Worked

Closing an action is not the same as solving the problem. Verify the outcome:

  • Re-inspect the specific area at a set interval
  • Compare the number of repeat findings against the previous cycle
  • Check that the root cause, not just the symptom, has changed

A finding that does not return after two audit cycles is genuinely resolved. One that does return tells you the root cause was missed, so go back to the analysis.

Booking Your Next Drainage and Site Review in Ringmer

If your audit has flagged drainage faults, get them assessed by people who inspect drains for a living. Pro Drain Experts offers 24/7 emergency call-outs, CCTV surveys with detailed reports and recommendations, and same-day response across East Sussex, West Sussex and Kent. Our fully equipped vans and up-front pricing mean you know what the work involves before we start. For current prices and a quote, contact us directly for an emergency call-out or to book a survey.

Frequently Asked Questions

What are the steps in a health and safety audit?

A health and safety audit usually follows five stages: define the scope and criteria, gather documents and records, inspect the workplace and interview staff, record findings as evidence-based observations, and then agree actions with owners and deadlines. Each stage should link back to the legal duties under the Health and Safety at Work etc. Act 1974 and the Management of Health and Safety at Work Regulations 1999. Keeping the stages separate makes it easier to see where a finding came from and whether it has been verified before action is assigned.

How do you identify the root cause of a health and safety problem?

Start with the finding, then ask why it happened and keep asking until you reach a cause you can control, usually a missing procedure, unclear responsibility, inadequate training or poor equipment. The Five Whys technique works well for simple issues, while a fishbone diagram suits findings with several contributing factors. Check the cause against the evidence you collected during the audit, not against assumptions, and confirm that fixing it would prevent recurrence rather than just treating the symptom.

How should health and safety audit findings be prioritised?

Rank each finding by the severity of harm it could cause, how likely that harm is, and how urgently it needs control, then consider how much effort the fix requires. Findings that expose people to serious injury or breach a legal duty should be dealt with first, even if they are quick to fix only in part. Low-risk, low-effort items can be batched together, while high-risk items may need an interim control measure until a permanent fix is in place.

How often should a workplace carry out a health and safety audit?

There is no fixed legal frequency for a health and safety audit in the UK, so the interval should reflect the level of risk, the rate of change in the workplace and any past findings. High-hazard sites often audit quarterly or more, while lower-risk offices may audit annually. Trigger an extra audit after an incident, a significant change in processes or premises, or a new piece of equipment. The Health and Safety Executive guidance on managing health and safety is a useful reference point for setting that schedule.

GoogleAdd prodrianexperts.co.uk as a preferred source on Google →